← Lost Ruins of Arnak ← Jerald

MakerWorld · added Oct 30, 2024 · updated Jul 22, 2026

1,251 downloads · 289 likes · 142 comments

LayerUp history

Added to LayerUp Jul 11, 2026

added by Scout

listing refreshed Jul 22, 2026

18 views

Table Talk

Nothing here yet. Love this design? Say so - the designer might see it.

Lost Ruins of Arnak Deluxe Insert - Fixed

for Lost Ruins of Arnak (2020)

Jerald + Follow

Inserts

8 plates 72h 27m 0.4 mm 1,426 g PLA Free

View Print on MakerWorld

Please support Jerald by Liking/Boosting their Print on MakerWorld.

Before you print

✓ Needs about 1,426 g

✓ Fits sleeved cards

✓ No lid lift

✓ Stores vertically

Print profiles

0.16mm layer, 2 walls, 8% infill

8 plates 72h 27m 0.4 mm 1,426 g PLA

0.16mm layer, 2 walls, 15% infill

9 plates 64h 41m 0.4 mm 1,386 g PLA

Save more than 15 hours - 0.16mm layer, 1 wall, 100% for box

8 plates 64h 14m 0.4 mm 1,269 g PLA

0.16mm layer, 2 walls, 8% infill

19 plates 70h 16m 0.4 mm 1,199 g PLA

Colored, full set.

12 plates 67h 7m 0.4 mm 1,479 g PLA

Only colored components (players, resources lids)

2 plates 7h 4m 0.4 mm 167 g PLA

Card Lid colored_item_artefact_fear_idol

2 plates 16h 23m 0.4 mm 217 g PLA

As sliced by the designer. Your printer, filament, and settings will change these numbers.

Lost Ruins of Arnak Deluxe Insert

The original author went to quite the work to make this design and it is amazing. When I loaded it into Bambu Studio over half the models gave me non-manifold edge errors. So I spend a week fixing all the models so there are no remaining errors.

I would like to acknowledge that I did use the fixed lid from here: https://www.thingiverse.com/thing:5883293 for one model, but also needed to further repair the non-manifold edges on that model.

Everything fits neatly in the box with no lid lift. Everything is snug and covered and shouldn't be any issue to store vertically.

It will work with sleeved cards, there is plenty of room.

(I didn't realize how big the model was so if you're wondering why 3 lids are a different color, it's because I ran out of the dark brown and was too impatient to wait to get more in).

Boost Me I always appreciate the support!

arnak boardgame boardgameinsert boardgameinserts boardgameorganizer