Scout Card Game Insert - minor remix

Kudos to the original designer.

This is a minor remix removing the divider in the 1's tokens, as the tokens with our game were a bit thicker and didn't quite fit with the sloped divider.

I've included some g-code which can be used with Prusament PLA.

If you print without using the included gcode, I recommend setting your exterior wall width to 0.3mm . This lets your slicer deal with some of the thin divider walls, instead of it splitting up the walls with seams in the middle.

Alternatively, if you're using Prusaslicer with a 0.4mm nozzle, you could set the Advanced→Arachne perimeter generator→Minimum perimeter width=75%

If you're tired of the cardboard box your Scout game came in, check this out: https://www.printables.com/model/1086166-slide-n-lock-box-for-scout-game-insert