7 Wonders, Travel Storage System

A storage system for 7 Wonders 1st Edition (including Leaders & Cities expansion).

Got tired of lugging around the full box whenever I wanted to bring along 7 Wonders (which is always), so I designed this ultra-compact storage system!

The main three card boxes has cutouts on the side, where you can place pre-sorted Age cards. When playing the game, you can also use the card boxes as storage for the extra cards, so it's easier to prepare for the next round (guilds cards / city cards / leader cards).

Note that there are two versions of the "box" - you only need one of them

• One for 7+2+1 = 10 boards (base game, cities, and leaders)

• One for 7+2+1+4 = 14 bards (base game, cities, leaders, and wonder pack)

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

150

Infill:

10

Filament:
3D Prima PLA / PETG Various

Notes:

The walls of the containers are 0,8mm thick, so a 0,4mm nozzle or less is recommended.
There is not much infill needed, as the perimiters and the wonder cards themselves provide much of the rigidity (I used <10%).

In my version, I printed the "Travel box"-pieces using PETG, as it is a bit more ductile. PLA should be fine for the card containers etc. However, be careful with the Age 1-3 containers, as the cutouts don't have a lot of support and can break off easily (there are additional cutouts to compensate for a couple of missing ones though).

Category: Toy & Game Accessories