Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
The Lord Of The Rings Logo / Sign (No AMS/AMS)
1 plate
1h 32m
0.4 mm
41 g PLA Free
View Print on MakerWorld
Please support Jotas3D (Jotasct) by Liking/Boosting their Print on MakerWorld.
Before you print
✓ Needs about 41 g
The Lords of the Rings Logo, approximately 16 x 4 cm. This version is designed for both AMS and NO AMS.
If you want to print it WITHOUT AMS , just add a pause at the layer where the letters start (layer 121) and change the filament manually.
You can find the stacked logo on my profile:
The Lord of the Rings: Journeys in Middle-Earth 2019
Match filament
Expansions
/pic6985029.png)
The Lord of the Rings: Journeys in Middle-Earth – Poison Promise 2022
/pic7060913.jpg)
The Lord of the Rings: Journeys in Middle-Earth – Scourges of the Wastes Figure Pack 2022
/pic6273164.png)
The Lord of the Rings: Journeys in Middle-Earth – Spreading War Expansion 2021
/pic5871000.jpg)
The Lord of the Rings: Journeys in Middle-earth – Dwellers in Darkness Figure Pack 2020
/pic5873467.png)
The Lord of the Rings: Journeys in Middle-earth – Shadowed Paths Expansion 2020
/pic5926857.png)
/pic5150836.jpg)
/pic4698941.png)
