Dominion Holder Spines (Used with Center-Locking Card Holders)

These models are spines to keep the card holders together when they are in storage.

The original card holder models are here:

I created a variety of lengths so you can mix/match depending on your storage solutions.

- Spine 122mm (10x 14mm holders)
- Spine 62mm (5x 14mm holders)
- Spine 50mm (4x 14mm holders)

I found having 2x 32m + 1x 22mm + 1x 14mm works well for money (copper=32mm, silver=32mm, gold=22mm, plat=14mm), so there's a spine to hold those:

- Spine 94mm (2x32mm_1x22mm_1x14mm)

---

If you noticed that 122 != 14 x 10 , that's because these holders stack/overlap by 2mm a piece, so the actual length is (H¹ + H² ...) - ((N-1) x 2) , where Hˣ is the height of the individual holders, and N is the total number of holders that will be held together by a spine.

So, for 10x 14mm holders, it looks like

(14 x 10) - ((10-1) x 2)

simplified to:

140 - (9 x 2) == 140 - 18 == 122