OpenForge 2.0 Dungeon Saga Dwarf King Quest - Print List & Custom Walls

Sample (my game shelve decoration) https://www.youtube.com/watch?v=ARbKpOfhhVk

Here is a print list with some custom files for dungeon saga.

I compiled the original files (from remixes) so you don't have to search them all

I Included a description file of what tile you need for what quest

In that same file, there is also the final list of tiles you'll need to print

I'll also try to upload a picture for each quest of tile placements

Custom made tiles:
* WallBlocks (1x1, 2x1, 3x1 walls, used to create corners, Y piece, columns, & stuff)
* Tiles with wallblock in there
* Tiles with pillards in there
* small wallblock (to be placed freely ON a tile)
* Special Rotating Tile (made of 1 2x2 riser+grate, and 4 1x2 steps, and 4 3x1 bases)
* Special Dwarven Royal Big Hall Tile (big !)

Final Tiles List:
* 22 Floor with 1 column (pillar or wallblock) 2x2
* 6 Floor with 2 column (pillar or wallblock) 3x2
* 8 Floor with 2 wallblock 2x2
* 1 Y Floor 3x3 (3x3 with 3 wallblocks)
* 1 Special Dwarven Royal Big Hall Tile 9x7 + 3x1 (this file is zipped, because the original is > 750mb...)
* 1 Special Rotating Tile Center 2x2
* 4 Special Rotating Tile Steps 2x1
* 11 Floor 3x3
* 10 Floor 3x2
* 4 Floor 2x2
* 2 Floor 3x1
* 13 Floor 2x1
* 2 Floor 1x1
* 3 Wallblock 3x1
* 15 Wallblock 2x1
* 15 Wallblock 1x1
* some InnerWallBlock 1x1 (+- 10 to be sure)
* 23 Wall 3x
* 21 Wall 2x
* 2 Dwarven Wall 4x1
* 6 Dwarven Wall 3x1
* 3 Dwarven Wall 2x1
* 2 Dwarven Wall End 1x1
* 4 Dwarven Wall Statues 1x1
* 4 Dwarven Wall T 1x1
* 7 Dwarven Wall Corner 1x1

And a lot of openforge bases with it

For the big rooms, I also made some 4x4 magical circles, so instead of creating a room with 4 3x2 tiles, you can create 1 4x4 magical floor + 2 2x2 other floors (grate, magical, etc)

try to have a set of multiple different floors (dwarven, cut stone, dungeon stone, grates, magical, etc) so there is diversity in your dungeon
Always pay attention that the scale should be 25mm, NOT inches... if it is, you'll have to rescale to 25mm (98.23% if I recall)

Needed material for assembly
* Bucky balls 5mm - magnet sphere - magnet balls (search on eBay)
* glue

Painting material:
* some light gray primer (cannister or not)
* wooden varnish (I made a mixup between a very blackish one and a mild brown)
* I use isopropyl alcohol to dillute the varnish, so it dries pretty quickly
* a brush for the varnish mixture