← Dune: Imperium – Uprising ← LawMoney

MakerWorld · added Jan 17, 2025 · updated Jul 21, 2026

300 downloads · 63 likes · 31 comments

LayerUp history

Added to LayerUp Jul 11, 2026

added by Scout

listing refreshed Jul 22, 2026

Table Talk

Nothing here yet. Love this design? Say so - the designer might see it.

Dune Uprising Insert (Incl. Bloodlines)

for Dune: Imperium – Uprising (2023)

LawMoney + Follow

Inserts

7 plates 25h 48m 0.4 mm 1,018 g PLA Free

View Print on MakerWorld

Please support LawMoney by Liking/Boosting their Print on MakerWorld.

Before you print

✓ Needs about 1,018 g

✓ Fits sleeved cards

Print profiles

0.2mm layer, 2 walls, 7% infill

7 plates 25h 48m 0.4 mm 1,018 g PLA

0.08mm layer, 4 walls, 15% infill

2 plates 2h 28m 0.4 mm 21 g PLA

As sliced by the designer. Your printer, filament, and settings will change these numbers.

Usage

This accommodates Dune Imperium: Uprising as well as the Bloodlines expansion. This fully integrates the CHOAM module and does not have a separate area to store those apart from the rest of the components.

This does not work with sleeved cards . It would require a complete re-design from the ground up to accomodate them.

This insert is for you if you:

• Like beefier, chunkier inserts

• Are obsessed with having as many rounded corners as possible

• Are really trying to speed up setup / teardown as much as possible

Credits

The layout was based off of lilypeng2002's Dune Uprising + Bloodlines insert , which was in turn based off of Jerald's Dune Imperium Uprising Organizer . Lilypeng2002's insert added a lot of features I didn't need (lots of extra 3d printed replacement components) and lacked some features I missed from Jerald's original insert (more secure board and rounded wells at the bottom of resource trays). As such, I re-drew all parts (except player trays) from scratch to customize the design and add a few new features that would further decrease setup time.

Printing

Print 1x of all provided files. You will also need to print 4x of Jerald's Player Trays . Those are not included in the print profile, as I have made no significant changes to them.

Sardukar Skills

A tray has been added with a slot to allow Sardukar skills to be displayed (much like the imperium row is). Alternatively, you can just flip over the top 4x tiles if you prefer viewing from the top down.

Tech Tiles

The tech tiles tray is designed to be lifted out and put straight onto the Ixian Embassy board. The spacer is necessary to allow items on top to be fully supported.

First Player Token

The first player token was used from Dominion6Studios' Dune Imperium First Player Marker . I re-scaled such that the base was 43mm (same size as the cardboard first player token). This allows the perfect fit in this insert. A re-scaled profile is included.

Shield Wall

The Shield Wall token was used from JuiceNeutron's Dune Imperium Uprising Shield Wall . I included a colorized profile.

boardgame dune dune uprising