Star Wars Deckbuilding Insert "Damage-Trackers"

This is an Insert in order to fit the printed Base-Damage-Trackers into the box. Make sure to read the instructions carefully.

• The Base-Damage-Trackers are only included in the .3mf-File. See Instructions below about how to download and print them separately

• The insert does not fit sleeved cards

• The insert does not fit all the damage cubes anymore - but they are needed less anyways, since the base-damage gets tracked with the Base-Damage-Trackers

• It uses about 200g of filament

• Print two of the little boxes (one for resources and one for damage cubes)

• The StarWars-Logo does only appear if you paint it in the slicer

• No supports needed

• Use infill as you like - I used 10% honeycomb and it worked great with PETG

• Download Base-Damage-Trackers (or use my .3mf-File)

• IMPORTANT: Scale each Base-Damage-Tracker down uniformly to 200mm length, so it fits into the box. It should result in 200 x 15.81 x 83.72 mm in size.

• Color them in the slicer

• Print Base-Damage-Trackers