Speakeasy - Drop-in Trays

Drop-In trays and other accessories for Speakeasy , design to work with the plastic insert included in the box. It includes trays for all of the meeples (goons, cops, mobster speakeasies, barrels), moneys (split into two). It also includes optional organizing tray/display for the mobster strength tiles (so you don't have to sort them out every time) and barrel holders (to help them not tip and roll).

• Fits in the original insert.

• Individual trays speeds set-up a little by making easier to remove granular components from the box.

• Discard trays for the locations tiles.

• Split moneys tokens in two trays, one for each side of the table.

• All of the goon meeples should fit in the tray, but is requires a little bit of deliberate arranging. Otherwise, just dump them in the tray and place the ones that spill over in other parts of the insert.

• The barrels will definitely spill over. This will not be a problem after taking barrels out to set-up the ship, but some will need to be spread-out trough the insert when boxing everything.

• If you print the ship barrels holders, you can simply leave barrels in there. Make sure to place it back in the box with the opening facing the side of the box and using the cardboard risers to make it flush against it.

• The print profile is set for AMS printing. If you like to change the filaments or colors, instead of repainting everything it might be easier to do so when initiating the printing in the dialogue box to assign AMS filaments to project filaments.

• For single color printing, simply delete all but one filaments of the project. Bambu Studio will simply slice the multicolor bits as one.

• If importing the STL files manually, make sure to print 2 copies of the meeples_tray and discard_tray files. The **_overlay files are used for the multicolor printing.