Turing Machine Pulses Expander Mk I Front Panel

for Turing Machine (2022)

DrMoops + Follow

Storage & Containers

1 plate 19m 0.4 mm 7 g PLA Free

Please support DrMoops by Liking/Boosting their Print on MakerWorld.

Before you print

✓ Needs about 7 g

Found an old Mk 1 Pulses Expander build kit from a while back but did not have a front panel.

Simple front panel for the Mk 1 version with less jacks than the Mk 2.

Printed using a patterned plate for fun, but should work with any plate.

Would recommend 100% infill and at least 4 walls to reinforce the jack socket edges. PLA should be fine unless your case gets very hot.

Uploaded an stl with looser hole tolerances as well in case our solder jobs differ a bit in fractions of mm.

eurorack modular synth

Match filament

Main colors from the cover art. Find matching filament, or tap swatches to narrow.