Marvel United - Galactus and Larger Based Minis Storage Multiverse

Marvel United - Galactus and Larger Based Minis Storage Multiverse

Notes:

• No Supports Needed.

• If you have a Bambu X1 or P1 you can print this on one sheet. Be aware that you will need to block the cutter with a 3d Printed Push in piece. (https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations)

This design is based on the fantastic Designs done by @tshelley. His Designs for Mini Storage were GREAT. I wanted to do something Similar to what he did for the Larger Minis and Galactus from Multiverse.

Link to tshelly's designs: https://www.printables.com/@tshelley/models

If you have any questions please do not hesitate to ask. I am always happy to help.

Print the following for Organization:

1x MU_Galactus_Bigs_v0

1x MU_Galactus_NamePlate_v1

1x MU_Goliath_NamePlate_v0

1x MU_FinFangFoom_NamePlate_v0

1x MU_MoonGirl&DevilDino_NamePlate_v0

1x MU_Stature_NamePlate_v0

I designed this to be storable both flat on the bottom and sideways in a Kallax.

Noted Instructions:

All were Printed at .2mm Layer Height. 15% Cubic Infill 5 Top and 3 Bottom Layers