Marvel United (Season 1 & 2) Miniatures Box Insert - Sentinel Holders, Card and Token Trays

This Insert is an extension of tshelley’s excellent Marvel United Miniatures Box Insert and Penglord’s remix of that insert. I printed tshelley’s design almost as is (I printed the same token tray twice instead of one of each). I printed Penglord’s Lockheed Lockup and 1 Large Miniature holder.

This remix should hold most of Marvel United and Marvel United X-Men. It does not fit sleeved cards or the cardboard locations. I store the cards horizontally because I don’t like lid lift. I used an Elegoo Neptune 3 to print my insert. Because the build area was slightly too small I had to print some of these designs in pieces. I have loaded the files exactly how I printed them. If you have a bigger build area, you should be able to combine some of these and print them as one piece, should you like to do that. I will let you know which pieces you would be able to combine.

Marvel United Base Game Box:

• Large_Mini_Holder_Smaller

• MU_Card_Holder1

• MU_Card_Holder2

• MU_Card_Holder3

• MU_Card_Holder4

(For the Marvel United Base Game Box you should be able to combine Holder 1 and Holder 2. Holder 3 and Holder 4 can also be combined)

Marvel United X-Men Base Game Box:

• Large_Mini_Holder

• XLarge_Mini_Holder_Smaller

• MU_Card_Holder1

• MU_Card_Holder2

• MU_Card_Holder5

• MU_Card_Holder6

(For the Marvel United X-Men Base Game Box you should be able to combine Holder 1 and Holder 2. Holder 5 and Holder 6 can also be combined)

Marvel United X-Men Days of Future Past Box:

• Sentinel_Mini_Holder_ Print3 (To hold the Sentinels without their hands pushing against the sides of the box or creating lid lift, place them into their holders as I have shown in the picture).

• MU_Tokens_Lid_with_MarvelUnited_Right_34mm (I printed 2 of these)

• MUX_Tokens_Lid_With_MarvelUnitedXMen_Left_34mm (I did not print this. I didn’t think to make this until after I had printed 2 of the other lid)

• MU_Tokens_Part_1_20mm

• MU_Tokens_Part_2_20mm

• MU_Tokens_Part_3_12mm

• MU_Tokens_Part_4_12mm

(For The Days of Future Past box, you should be able to combine tokens Part 1 and Part 2. Tokens Part 3 and Part 4 can also be combined. This box also holds the infinity gauntlet.)

Marvel United Small Box (I picked the Guardians of the Galaxy Remix Box):

• MU_Tray_for_Locations

• MU_Tray_for_Villain_Dashboards

• MU_Token_Tray_for_Small_Box

(I store my rulebooks and other miscellaneous villain dashboards on top of the small box trays. I used a piece of 2mm thick chipboard as a base layer. I place the rulebooks on top of that. I glued some ribbon to the bottom of the chipboard to make it easier to get the rulebooks out.)

Spiffworld over on BoardGameGeek created the excellent card dividers. You can find the Marvel United Horizontal Card Dividers here. You can find the Marvel United X-Men Horizontal Card Dividers here .

This is my first design so let me know if I can improve anything! Feel free to ask any questions!

Designed with TinkerCad

Printer: Elegoo Neptune 3

Filament: Sunlu Pla +

Layer Height: .3mm (I’m sure .2mm would also work)

No Supports Needed