Log in to join the conversation.
Hot Streak Boardgame 2026 insert and money tray
Please support nanopino by Liking/Boosting their Print on Printables.
NOTE : This insert is for the 2026 print run of Hot Streak that has a shallower tray. Check that your tray is 26mm or 1inch deep before continuing.
An insert for Hot Streak 2026 designed for sleeved cards. It includes a money tray and an optional model version for multi-colored printing.
•
Print 2 of the T-shaped spacers: spacer-print-twice.stl , they lock together at the flat ends.
•
Decide whether you're printing in multi-color or not:
•
No multi-color: print money-tray.stl and yes-no-tray.stl
•
Yes multi-color: print trays-multi-color.stl and make sure to group the objects together and color them in your slicer.
•
Place the T-shaped spacers in a cross formation at the bottom of the tray.
•
Group 3 mascot betting tickets by mascot into each quadrant.
•
Separate the sleeved cards into 4 equal stacks, then place 2 stacks on each side of the divider.
•
Place the two trays on top, side by side.
•
If you're having trouble unpacking the trays, press down on the side of the money tray next to the yes-no tray. It should lever over to allow for easy extraction. (see 3rd pic)
