Log in to join the conversation.
Airbrush booth furnace filter holder
Please support Schleifflar by Liking/Boosting their Print on Printables.
A furnace filter holder for creating an airbrush booth using an Ikea Cabinet and a 12x12x1 furnace filter.
The filters I used are these: https://www.amazon.com/dp/B07FNQRDNK?th=1
The cabinet is from Ikea: https://www.ikea.com/us/en/p/besta-frame-white-stained-oak-effect-10247379/
On the back I used this flange: https://www.amazon.com/dp/B0000223Y8
Notably these filters are not actually 12" x 12" x 1", but are actually 11.81" x 11.81" x 0.81", and this housing is designed to fit them snugly
The filter housing has premade holes that will line up with the flange, and has holes for ¼" magnets to hold the cover in place, but I found the friction fit to be sufficient.
You will need to print 4 of each piece and then glue them together
