VW T4 Bus Transporter - Ashtray cupholder

I designed this cupholder for a VW T4 Transporter , maybe it also works for other models (NOT TESTED!!!)

Tips & Tricks:

• To print this cupholder: It is needed to use SUPPORT!!!

• I doing my best to make the model printable.

Material:
2x 3Mx6mm (DIN 912 / DIN-EN-ISO 4762)
2x M3x3mm Hot melt nuts ( https://de.aliexpress.com/item/1005003582355741.html?spm=a2g0o.order_list.order_list_main.34.1bdd5c5f1vSWGH&gatewayAdapt=glo2deu )
4x M5x12mm (ISO 7380-2)
4x M5 Nut

UPDATE 2023-05-01

• V3.0 Improved printing & design

• V3.0 Increased cup diameter! :)

• V3.0 Improved TPU design & fixing rings.

• V3.0 Changed clips to screw insertions

• V3.0 reduced postprocessing

UPDATE 2021-03-26

• V2.1 - Improved sliding

• V2.1 - Fixed cupstand

• V2.1 - Improved endstop handling

UPDATE 2021-04-02

• V2.2 - Centered Cuphole

• V2.2 - Design changes on TPU ring

• Updated Printing notes

• V2.3 - reduced thikness of TPU ring

UPDATE 2021-04-16

• V2.4 - add lock ring for TPU inlet (13x Self Tapping Screws M2*6 needed)

• V2.4 - design change cupstand (adding notch for screws)

Feel free to add a comment it will help to make things better =)

##

• Supports: Yes

• Resolution: 0.10mm

• Infill: 40

• Filament material:ABS/ASA/TPU

• Notes:
TPU = Recreuse FilaFlex Ultrasoft 60A works perfect.(Direct extruder needed and difficult to print for beginners!) Filament with a shore hardness >60A is not flexible enough.