The Great Wall board game - Time Token

Here is a time token for The Great Wall board game to replace the cardboard token, it is .25mm smaller in diameter than the cardboard token to hopefully adjust for printing inconsistencies to fit in existing storage solutions.

A test print earlier using a similar model with the Chinese writing did not come out good at .6 layer height with a .8 nozzle.

The pictured print is with a .12 with a .4 nozzle, the top character still didn't come out as nicely as I would have hoped. The model should be good, just need to dial in the printer more.

“Hopefully it turns out good for those that try it before I get to. It should take ~10mins to print, most likely less.” This was wrong, I quoted a time with the .6 layer height accidentally, it took a little over 20 minutes to print.

Here is the full insert for the game with all the expansions:

https://www.printables.com/model/414277-the-great-wall-board-game-insert-organizer-with-sl

##### EDIT #####

There are 3 versions. One is embossed on the +1 side and the other is debossed for the +1 side. I also made an embossed version that is thicker in case others wanted to use that one. The thicker one works better for resin.