THROUGH THE DESERT Complete Inlay Solution

Made for THROUGH THE DESERT boardgame by Reiner Knizia.

Here you can find ROCK tiles for the game as well as empty tiles for own rock creations. Please share!

Here you can find custom PALM tiles.

In the download section you will find all neccessary .stl files and the quantity how often you need to print them. Do printing first and than follow this instruction.

Step-by-step instruction:

• You can place the instruction(s) on the bottom of the box if you like.

• After that you place 2x SIDE SUPPORTS in the left and right corners as shown on the pic.

• You need 10x SMALL TOKEN BOXES. Two per color because the board size is very large and that way you can place all colors on 2 sides of the board which makes a much smoother gameplay.

• You need 1x LEADER TOKEN BOX for the camels with riders.

• You may print 1x the STUFF BOX which is made to fill out the empty space in the first bottom stage. Usable for pen & paper or whatever.

• Place ALL 12 BOXES into the box as shown on the pic. First stage is complete now.

• Now you place the folded BOARD on top of the boxes. Boxes and board align perfectly and have the same outer contours. It also functions as a lid for the boxes below to avoid stuff from falling out.

• As you can see you have about 3cm empty space left on the side of the board. This is the place to put the completely TOKEN BOX in (see pic). Second stage is complete now.

• Third stage is made for bigger stuff. Let's begin with the PALM-Box. Put in the five palms an place the box as shown on the pic.

• The rest of the empty space will be filled out with 2x ROCK-BOXES. Third stage is now complete and you are finished.

• The original lid of the game can now be placed on top of the SIDE SUPPORTS and holds tight.

Have fun & enjoy!

Material: PLA
Infill: 15%
Layerheight: 0,2mm