Crusaders, Thy Will Be Done deluxe edition (plus expansion!) box insert

Print one of everything except BitBox1 and BitBox2. You will need 5 of BitBox1 and 4 of BitBox2. Arrange them as seen in the labeled picture above. Everything was designed to be printed without needing any supports except for the "Filler" file, which will need external supports turned on.

BitBox2 holds the all the cardboard and plastic/wood pieces for each player. Just pull the box out and hand it to the player for setup. If you prefer to use the wooden pieces over the plastic, just swap the position of those components from what's shown in the picture.

Once arranged, the player boards will sit over the BitBoxes and be held in place by the top row of boxes. This keeps the player boards from sliding around. The main game board will then sit on top of those and the "Filler" and "Black Knight" pieces (not shown in the labeled picture, see second picture) will sit in on the far right (as I have it laid out) of the box to keep the main board from sliding around and give you somewhere to store the Black Knight figures.

In the picture above, I have the influence tokens in the yellow bag and the Building Bonus tiles in the red bag. The bags aren't necessary to hold those components in place, it just gives some padding from them potentially banging against the main board. The placement of those components in the boxes can be flipped.

If everything is arranged as shown, all components should be held in place and no pieces should spill out of their containers once the box lid is in place.


UPDATE FOR DIVINE INFLUENCE EXPANSION... I made a couple of modifications to allow the Divine Influence expansion to fit in this box. If you have already printed this, you'll just need to reprint a couple of files. Print the 3 files marked "exp" and replace the current boxes in the insert (note that bitbox2 is replaced by BitBox2-exp AND BitBox4-exp). I've added a couple of new pictures that show the expansion contents and their placement. Note that one extended player board (the blue one in my picture) is placed sideways to allow the right-angle enemy track to fit in. When laid out this way there is a tiny bit of lid lift but if you have the sleeve, it still fits over the box