Loopin Louie - Extension arm coinbase holder

0.20mm Standard
ABS
Wall loops: 4
bottom shell layers: 4
Sparse infill: 35%
Infill/Wall overlap: 20%

Designed for wood screws: 4mm x 20-25 mm with flat head max 7 mm x 3mm. Predrill hole for fastening with 2/2.5/3 mm depending on used screw internal diameter (before thread). Screw head will lay flat with upper surface. Do not drill any holes to extension arms or coinbase.

Recommended: longer crews and shorten them to increase strength or use screw without sharp tip. Wood screw sharp tip without thread is not holding.

Print 1 for each player (4 or 8).

At the extension arms there is empty space under coinbase. This item is designed to be installed bottom of the empty space under coinbase about middle distance from extension end towards central crane tower. At default one holder per player is enough. Install one at time to get locations correctly.

It is designed to fit perfectly to prevent coinbase holder from moving sideways which wears it out over time. It is designed to be used with Loopin Louie - Extension arm outer holder and Loopin Louie - Extension arm inner holder .

If you'd like to support me.. you can go to