Loopin Louie - Extension arm outer holder

0.20mm Standard
ABS
Wall loops: 4
bottom shell layers: 4
Sparse infill: 35%
Infill/Wall overlap: 20%

Designed for wood screws: 4mm x 20 mm with pan/round/tuss head head max 7 mm x 3mm. Predrill hole for fastening with 2/2.5/3 mm depending on used screw internal diameter (before thread). Do not drill any holes to extension arms.

Recommended: longer crews and shorten them to increase strength or use screw without sharp tip. Wood screw sharp tip without thread is not holding.

Print 1 for each player (4 or 8). Print upside down.

At the extension arms there is lower part at the left next to presser. Perfect location is away from the player fingers holding the lower part from top (opposite of player) and to be able to turn 90 degrees. It is not affecting to game or players if location is selected correctly. Install one at time to get locations correctly.

It is designed to fit and hold perfectly from the top and preventing board coming off from inner holder. Use together with Loopin Louie - Extension arm coinbase holder and Loopin Louie - Extension arm inner holder .

If you'd like to support me.. you can go to