Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Harley-Davidson Poker Chip Holder
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
✓Needs about 945 g
From the designer's print profile
Print Profile (2)
0.2mm layer, 2 walls, 15% infill
8 plates
14h 19m
549 g PLA
P1S, H2S, X1, H2C, X1 Carbon, A1, H2D, P2S, X1E, P1P, H2D Pro, X2D, A2L
This is the smaller version that was posted with larger coin slots. Print one of the quarters to confirm poker chip fits before printing full model. If you need to enlarge the coin slot, open the file in Bambu studio and scale the negative parts that have been added. This is intended to be glued together at the seems.
Plate Details (8)
0.4 mm nozzle, all plates
Plate 1 · Top Left
2h 45m
113 g
PLA · 113 g
Plate 2 · Top Right
2h 47m
114 g
PLA · 114 g
Plate 3 · Bottom Left
2h 48m
113 g
PLA · 113 g
Plate 4 · Bottom Right
2h 49m
115 g
PLA · 115 g
Plate 5 · Orange Plate #1
45m
22 g
PLA · 22 g
Plate 6 · Orange Plate #2
37m
19 g
PLA · 19 g
Plate 7 · Black Shield
1h 30m
48 g
PLA · 48 g
Plate 8 · White Letters
18m
5 g
PLA · 5 g
0.2mm layer, 2 walls, 15% infill
9 plates
23h 51m
945 g PLA
H2S
Plate Details (9)
0.4 mm nozzle, all plates
Plate 1 · TOP LEFT
4h 20m
191 g
PLA · 191 g
Plate 2 · TOP RIGHT
4h 19m
190 g
PLA · 190 g
Plate 3 · TOP LEFT - BOTTOM RIGHT
55m
29 g
PLA · 29 g
Plate 4 · BOTTOM LEFT
4h 24m
195 g
PLA · 195 g
Plate 5 · WHITE LETTERS
35m
10 g
PLA · 10 g
Plate 6 · TOP RIGHT - BOTTOM LEFT
57m
29 g
PLA · 29 g
Plate 7 · BOTTOM RIGHT
4h 23m
193 g
PLA · 193 g
Plate 8 · CENTER - CON. PINS
3h 9m
90 g
PLA · 90 g
Plate 9 · ORANGE LETTERS
49m
18 g
PLA · 18 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Model Description
This is fan art. I do not own the rights to Harley-Davidson. This is for personal use only. DO NOT SELL.
This is the poker chip holder I made. This can be printed on the larger Bambu printers. This won't fit on the smaller series. You can print the center logo on the smaller series. Feel free to change the colors and have fun with it!
Note: The dowels are only for alignment. Be sure to use a good CA glue and glue the seams. This is what I use:
affl: https://amzn.to/4lFgA6N -Glue
affl: https://amzn.to/4smSznp - magnets
Happy Printing!
Center Logo:
https://makerworld.com/en/models/2186941-harley-davidson-logo#profileId-2374117
P Series:
/pic227451.jpg)