Carcassonne / Karak Tower Tiles Holder

Have you ever had a problem with your Carcassonne or Karak tiles not staying in a neat stack and constantly sliding apart? Then this is exactly what you need. You can place them anywhere on the table.

This model prevents the tile stack from falling apart, and the tiles can be smoothly pulled out from the bottom with a gentle finger pull. Features slightly sloped edge and cutout for easier tile insertion. It is optimized for printing so it has low filament consumption.

You can choose between 1, 2, or 3 columns.
(The more columns connected together, the better the stability.)

This model comes in 3 versions :

Standard – Uses the least filament and prints the fastest.

Detailed – Features a nice brick-style design, with slightly higher filament usage and longer print time.

TPU Bottom – Provides better grip. Glue is required, but no AMS is needed.
(The holes are only used to align the TPU part, not as connectors!)

TPU VERSION ASSEMBLY

1. Apply glue to the bottom of your model and add a few drops into the holes.
2. Use the holes to align the TPU bottom part with the model and press firmly together.
3. Wait for the glue to dry, and then you’re ready to play.

Boost Me If you like this model the best support you can give me is boost, it's free and encourages me to do more and better models. Thank you.

Feel free to check out my other board game accessories Compact Karak / Carcassonne grid (2 x2) .

If your print turned out successfully and you liked the model, feel free to leave a comment and share photos of your print.