Table Talk

Nothing here yet. Love this design? Say so - the designer might see it.

Battletech Hex Base Team Markers w/matching Clip

for BattleTech (1985)

Miniatures Free

View on MakerWorld 40 122 Added Jul 5, 2025 · Updated Aug 6, 2026 Support Enigmatosis by Liking/Boosting their model.

Plan Your Print

✓Needs about 13 g From the designer's print profile

Print Profile (11)

#01-10 CGL 30.66mm

1 plate 1h 6m 13 g PLA

P1P, X1 Carbon, A1 mini, X1, A1, P1S, H2S, X1E, P2S, H2D Pro, H2C, H2D, X2D, A2L

Hexes 01-10 CGL 30.66mm size with normal clips

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

1h 6m 13 g PLA · 13 g

#01-10 CGL w/Big Clip 30.66mm

1 plate 1h 8m 13 g PLA

P1P, A1 mini, H2D Pro, A1, X1, P2S, X1 Carbon, X1E, H2D, P1S, H2S, H2C, X2D, A2L

Numbered 01-10, they are CGL 30.66mm size but with larger clips to grab onto smaller hex bases. Tested with 30mm third party hex bases. They are an extremely tight fit on CGL bases and not recommended for them unless you're OK scraping the edges of the base or plan to never take them off.

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

1h 8m 13 g PLA · 13 g

#01-10 IWM 32mm

1 plate 1h 8m 13 g PLA

P1P, A1 mini, H2D Pro, A1, X1, P2S, X1 Carbon, X1E, H2D, P1S, H2S, H2C, X2D, A2L

Numbered 01-10, they are IWM 32.00mm size.

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

1h 8m 13 g PLA · 13 g

#01-36 CGL 30.66mm Level III

1 plate 3h 40m 45 g PLA

P1P, P2S, X1, H2D, H2C, A1, P1S, H2S, H2D Pro, X1 Carbon, X1E, X2D, A2L

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

3h 40m 45 g PLA · 45 g

#11-15 CGL 30.66mm

1 plate 37m 7 g PLA

P1P, H2S, X1 Carbon, A1, X1, H2D, H2D Pro, P2S, A1 mini, X1E, P1S, H2C, X2D, A2L

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

37m 7 g PLA · 7 g

#00 Single CGL 30.66mm

1 plate 18m 2 g PLA

P1P, P2S, X1, H2D, H2C, A1, P1S, H2S, H2D Pro, X1 Carbon, X1E, A1 mini, X2D, A2L

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

18m 2 g PLA · 2 g

#01-10 IWM w/Big Clip 32.00mm

1 plate 1h 9m 14 g PLA

P1P, H2S, X1 Carbon, A1, X1, H2D, H2D Pro, P2S, A1 mini, X1E, P1S, H2C, X2D, A2L

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

1h 9m 14 g PLA · 14 g

#01-10 Smaller 30.00mm

1 plate 1h 6m 13 g PLA

P1P, A1 mini, H2D Pro, A1, X1, P2S, X1 Carbon, X1E, H2D, P1S, H2S, H2C, X2D, A2L

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

1h 6m 13 g PLA · 13 g

#01 Single IWM 32.00mm

1 plate 13m 2 g PLA

P1P, H2S, X1 Carbon, A1, X1, H2D, H2D Pro, P2S, A1 mini, X1E, P1S, H2C, X2D, A2L

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

13m 2 g PLA · 2 g

#02 Single Small 30.00mm

1 plate 13m 2 g PLA

P1P, A1 mini, P2S, A1, H2C, P1S, X1, H2D, X1E, H2D Pro, X1 Carbon, H2S, X2D, A2L

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

13m 2 g PLA · 2 g

#03 Single CGL w/Big Clip 30.66mm

1 plate 13m 2 g PLA

P1P, H2D Pro, A1, H2C, X1, H2D, P2S, A1 mini, X1E, X1 Carbon, H2S, P1S, X2D, A2L

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

13m 2 g PLA · 2 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Model Description

Hex markers for Battletech that clip onto the unit's hex base and are numbered. Use different colors for team identification. The hex base has front and back clips to prevent falling off the base when you lift up the unit. Includes matching numbered clip that can attach to the unit card or record sheet.

For most Battletech Force Pack minis the base is a loose fit and will stay on, the print shouldn't require much if any bending if you angle the front hex face in first.

Primary profile is ten hexes labeled 01 through 10.

Profiles include different sets and counts for both the numbers and quantities. Alternate sizes for tighter clips and larger Iron Wind Metals hex bases are available.

battletech wargaming wargaming bases hex hex adapter boardgame accessories boardgame accessory tabletop accessories hex base battletech aces