Game of Thrones Board Game Power and Order Tokens

This is a remix of the excellent game tokens for Game of Thrones - The Board Game by TheSourMelon.

I was very happy with these but thought they were rather generic and they were missing the house sigils, so I designed new ones. After some effort I am rather pleased with the results and thought I'd share these with you.

Contents
--------

Order tokens:

A plate for each of the 6 main houses (15 order tokens per house, halved). The order tokens are printed flat in two parts and can be glued together using CA glue (i've included a printable aid to make it easier to do this precisely). A textured plate works well to improve glue adhesion. All are done in 2 colours (except house Martell which has 3) but an AMS is not necessary as you can switch colours beween layers. The dimensions after glue-up match the original cardboard tokens (25 mm diameter x 2 mm thick).

Power tokens:

A plate for each of the 6 main houses (21 power tokens per house, one-sided). I replaced the generic crown on the original power tokens with the house sigils. AMS not necessary. The dimensions match the original cardboard tokens (20 mm long x 15 mm wide x 2 mm thick.

Print recommendations
-----------------------------
In order to get the best results, I would recommend using a 0,2 mm nozzle, 0,06 mm layer height and change the standard and outerwall line width to 0,15 mm (75% x 0,2 mm nozzle). Especially for the power tokens; the last setting is important not to loose half of the sigils for house Greyjoy and house Baratheon (on my first attempt, these ended up being a series of dots).

Credits/Attribution
--------------------
The tokens themselves are a remix of those by TheSourMellon (https://www.thingiverse.com/thing:6833239)
I used most of the Game of Thrones sigils based on a remix by thecardbazaar (https://www.thingiverse.com/thing:4116606)
For the Tyrell sigil, I remixed the one by gotbluemilk (https://www.thingiverse.com/thing:3038860)

All sources were provided under a Creative Commons - Attribution or Creative Commons - Attribution - Non-Commercial license

As a last note, I have included 21 power tokens per house while you only need 20 for the game. The extra token is used for a tray I also remixed for the game. It is glued to the front where I have included a removable stand in order to signify the house. This way, you can choose whether to print the tray in the same colour as the tokens or to print 6 trays with the same colour. The trays hold the tokens and keep the screens in place. If you are interested, I've provided a link: https://makerworld.com/nl/models/2480090-game-of-thrones-boardgame-player-trays-remixed#profileId-2724072