Fruit Fight card game - SnapLock Box

for Fruit Fight (2021)

MrMan2k7

Card & Deck Holders Free

View on MakerWorld 1 Added Jun 14, 2026 · Updated Jul 19, 2026 Support MrMan2k7 by Liking/Boosting their model.

Plan Your Print

✓Needs about 109 g From the designer's print profile

✓Fits sleeved cards

✓Optional multicolor profile The designer also offers a multicolor way to print this (an MMU/AMS profile or per-color parts)

What it takes

2 plates 3h 31m 109 g PLA

A1, H2D Pro, H2S, X1E, H2D, P2S, P1S, X2D, P1P, H2C, X1 Carbon, X1, A2L

Plate Details (2)

0.4 mm nozzle, all plates

Plate 1 · Plate 1

2h 24m 82 g PLA · 75 g PLA · 2 g PLA · 1 g PLA · 1 g PLA · 1 g PLA · 1 g PLA · 1 g

Plate 2

1h 7m 27 g PLA · 27 g

Model Description

I used Layer51's template to create a SnapLock box for the Fruit Fight card game from CMYK (2024 edition).

I measured my cards at 61.06mm x 98.38 mm x 27.82mm. I upsized this in the template to 62mm x 99.5 mm x 29mm for a little extra space.

The box is slightly oversized, but probably not enough for sleeves. I'll try to add an alternate print for sleeved cards in the future.

This was printed with 7 colors. If you only have a single AMS, you will need to swap colors mid-print or assign the colors differently. See this guide for instructions.

Filaments used for my print:

BambuLab PLA Basic - Brown

BambuLab PLA Basic - Purple

AMOLEN PLA - Pumpkin Orange

BambuLab PLA Basic - Sunflower Yellow

eSun PLA Basic - Cold White

Polymaker Panchroma Silk PLA - Magenta

card game snaplock

Fruit Fight 2021

Match filament

Main colors from the cover art. Find matching filament, or tap swatches to narrow.