Salton Sea Insert/Organizer

An insert for the board game Salton Sea.
The insert fits all sleeved cards and all 5 language rulebooks.

Part of the design is have the rulebooks on top to prevent any shifting, so if you're not keeping all of them the box might actually be too loose and parts could get mixed if the game is tilted.

You'll need to print:
4x SaltonSea_PlayerPieces.stl
3x SaltonSea_CardsHolder.stl
1x SaltonSea_TilesHolder.stl

I sleeved with sleeve kings sleeves, which are 60microns, and I managed to fit all cards, while still maintaining some level of thought as to where the cards go:
1$ actions + research ==> 70 cards
3$ actions + 5$ actions ==> 72 cards
claim + objective + contract + solo ==> 72 cards

As you can see from the pictures, the way to fit everything in is to:
1. Put all player boards at the bottom
2. Place the card holders on their sides along the edge of the box
3. Place the player pieces boxes and tiles holder
4. Game board goes on the player pieces boxes
5. Instructions and player aids goes on that


As with all of the inserts I print, I use 0.28 layer height, no top/bottom and a 20% grid infill.
This saves a bit on material (and weight), and I don't really need the parts to be rigid/strong, as they're not under stress.