Sidereal Confluence and Bifurcation Storage With Nearly Zero Lid Lift

Yes, it's possible to get the entire game into the base box.

NOTE - This will NOT work with sleeved cards. There is zero chance any sleeved cards will fit in this setup. The tolerances on the card holders are *extremely* tight, less than a millimeter all around.

UPDATE on Sep 29 2024: Replaced Caylion and Yengii trays with a version with a cutout in back for the small cards so you can get them out separately.

The card trays (all but Im'Dril, which in the pictures is sky blue) go along the very bottom, and stretch nearly to the right side of the box when viewed from above. To the right of them, all twelve of the player shields will fit.

Next, put three of the full length bid tracks vertically. Then stack VictoryTokensAndChips_x2 to the left, and the Im'Dril card holder to the right of that, also flush up against the player shields.

Next, put KitUpgradeTokens.stl and ZethTokens up against the victory point tokens.

Put EniEtServiceTokens.stl, ImdrilGrandFleet.stl, DiceTray.stl, and TripleResourceTokens.stl in the next layer up.

Next, put down all 18 species boards.

Put seven of the full length bid tracks covering the bottom half of the species boards.

Place the remaining two full length bid tracks on the top half of the species boards, and stack the two full size resource trays on top of them.

In the remaining gap on the top right, place FaderonTokens.stl first, followed by CaylionVotingAndDoublers.stl.

In the space below the resource trays, on top of the stack of seven full size bid boards, place the two 91x91x12 trays and the 81x81x12 tray. Put the three Klas and two Deep Unity tiles in one of the 91x91 trays, and the 9 5x trays in the other 91x91 tray.

The 81x81x12 tray contains the large unity wilds and the Ultratech.

Finally, the 3 player bid track, the Kjas Independent Nations Donations, and the Kit and Zeth tech reference tiles stack on top of the bottom row of card holders.