Planet Unknown Insert

There does not seem to be any 3D printed insert for the retail or deluxe editions of the board game Planet Unknown . So, therefore I decided to design one myself.

• Fits sleeved and unsleeved cards

• Individual player component boxes and game components boxes

• Lids have finger holes for easy retrieval and opening. Also, lids can be attached to the underside of its tray

• Allows vertical storage with additional S.U.S.A.N. Cover

• All insert components can be printed on a 18x18 cm bed (e.g. Prusa Mini+)

The original injection molded insert must be removed for this insert to fit in the box.

• 1 score card tray and lid

• 2 card trays and lids

• 6 medium game component boxes and lids

• 6 small player component boxes and lids

Use the following settings to print the insert components with a hexagonal pattern.

• Nozzle Diameter: 0.4 mm

• Layer height: 0.25 mm (can be increased if your printer allows it)

• Perimeters: 4

• Solid Layers Top: 0

• Solid Layers Bottom: 0

• Detect Thin Walls: On

• Fill Gaps: On

• Fill Density: 20%

• Fill Pattern: Honeycomb

• It is recommended to also print the S.U.S.A.N. Cover made by FirstKlund to allow vertical storage of the box. I would also recommend to print the Locked Tech tokens by 3D Lee .