Batman: Gotham City Chronicles Organiser (S1 all in - S2 still in development)

I'm yet to receive my Season 2 stuff so I have no idea if this will work for that currently.I have made Two updates, thanks to a request from MadCollector;Update 4 May 2020 - another update, thanks to MadCollector's comment.If you have the 5 player expansion the box which holds the stamina/health cubes is not large enough. I've modified it, making it slightly larger and shrunk the two boxes which fit near it. So if you have the 5 player expansion use"gcc-top cube box - Alternative for For 5 player" and"gcc-top rivals and turn track box x 2 - Alternative for For 5 player"instead of the standard boxes. I have reprinted these and tested them as best I can, the box should now hold an additional 14 cubes - and there are 11 in the 5 played expansion - so should work.Update 30/4/2020 : New alternative main tiles box with space for 4 double cards and a version of the expansion tiles box with space for 1 double card - your choice which to use if you have the season 2 Trasher Suit.If you have the Trasher suit and Mr Pygs henchmen then just print 2 of the expansion tile box instead of the main and expansion.Update 19 Apr 2019 : Alternate Version is now available with storage for the 3D tokens in with the circular tokens - These fit in a box replacing the two middle token trays - all the items to make these are marked as Alternate and replace "gcc-token tray x 2" & "gcc-token tray lid x 2"There is a TinkerCAD image above showing the new style.This is my take on an organiser for Gotham City Chronicles, I mostly created it for myself, but thought others might get use out of it. I'll upload some more photos soon.I set myself couple of rules : Fit all tokens and tiles and try to allow some future expansionUse small trays that can be placed on the table during playThings don't fall out/move around when transported or stored on it's sideDon't have the 3D print items touch the boards - they scratch easily.Fit it in the main boxNo need to sleeve - the cards are not shuffled so really have no wear - Conan still all looks fine after several years of use.Keep the print size down for Ender 3 - the largest part came out at only about 150mm x 90mm - should work on most printersSo based on that I tried to fit everything where the plastic tray goes in the main box, leaving the foam layer between the prints and the boards.This is the result - all created in OpenScad, printed and tested - couple of other people's scripts used, and modified, to speed things up - will add credits to the bottom.Notes : the "x 2" / "x 4" in the file name indicates the quantity of that item to print.tiles-main - has space to fit 3 double tiles (T-Rex, Tweedledee/Tweedledum, Bud & Lou) by missing part of the central support. 4 Slot version now available for the Thrasher suit or an expansion box with one double slot - your preference!The Bat Logos will have to be glued into place, you cant print them vertically :( - they are not needed on the Tiles boxes.... but they are on the dice box or the dice fall out! Can upload a solid version if required.I did try a couple of ways of fitting sleeved cards - but the space needed increases massively as they no longer fit side by side across the box width.A couple of the scenery tiles do not fit anywhere - you can put the Lift from Wayne Manor expansion in the tile rack where they slope, but the other scenery tiles will fit between the top of the mini box and the roof of the box. Just to clarify the order in the actual main box - the order from the bottom up goes BoardsFoam with batboards/character sheetsMini's box and the organiserthis keeps the Organiser away from the boards and protects them with foam, though due to the cut-outs it isn't that flat a surface to work with.... soooo I think I'm going to flip this in my storage - so the mini box and organiser goes on the bottom, then the foam then the boards... why? because this is normally the way you want things, at least from my Conan experience - pick the scenario, get the board out and spread it on the table, select the characters, get the minis and set the game up. Obviously if you are using an expansion board then there is a wasted step in moving the boards out the way.... but these are just my musings :)I'm still tinkering with dividers for the tile trays as well.My printed copy in the photos still has some tweaks to do - I original printed 3 trays for tiles in once block.... but it wouldn't fit Rival tiles, so i reworked it to be 2 trays with 2 slots each - just printing my new versions now. I also recessed the Bat Logos into the face, as per the dice box, after my first print.Oh and the yellow bat on yellow background on the top box was a mistake - I set the levels wrong to switch colours - oooops!Credits : Ultimate Box Generator by pynejParametric card tray for board games by maguand last but certainly not least :Batman Symbol OpenSCAD by SeynisJust in case:FOR PERSONAL USE ONLY!Batman:Gotham City Chronicles is © Monolith and related logos and...