← Terraforming Mars ← Andows

MakerWorld · added Dec 11, 2023 · updated Jul 22, 2026

1,567 downloads · 216 likes · 132 comments

LayerUp history

Added to LayerUp Jul 11, 2026

added by Scout

listing refreshed Jul 22, 2026

3 views

Table Talk

Nothing here yet. Love this design? Say so - the designer might see it.

Terraforming Mars player boards - Single color remix

for Terraforming Mars (2016)

Andows + Follow

Player Dashboards

1 plate 1h 7m 0.4 mm 27 g PLA Free

View Print on MakerWorld

Please support Andows by Liking/Boosting their Print on MakerWorld.

Before you print

✓ Needs about 27 g

Print profiles

Topside board piece, printed upside down

1 plate 1h 7m 0.4 mm 27 g PLA

Backside of the player board

1 plate 43m 0.4 mm 23 g PLA

Multicolor

6 plates 8h 27m 0.4 mm 185 g PLA

Topside board piece ("raw finish")

1 plate 1h 2m 0.4 mm 24 g PLA

Backside 0.2mm layer, 2 walls, 15% infill

2 plates 1h 37m 0.4 mm 50 g PLA

Topside 0.2mm layer, 2 walls, 15% infill

2 plates 1h 21m 0.4 mm 28 g PLA

As sliced by the designer. Your printer, filament, and settings will change these numbers.

Player boards for Terraforming Mars board game. The original design by Samurai57 is mainly intended for multicolor prints and the single color version has a few issues with printing the letters (see the images). Those issues have been fixed in this remix.

My changes are only to the topside piece of the single color version, print one of these for each player (personally I would recommend an absolute maximum of four players for this game). I have also included the original backside and PDF print files in this upload for the sake of convenience… print also one of these for each player. I've had best results with the PDF-file when printing from Acrobat Reader instead of directly from the browser. I've used “Custom scaling: 100%”, but this user reported having the best results with 102.75% scaling. YMMW. Also, use photo paper for printing the PDF for even nicer result.

No supports or brim required. The topside plastic piece can also be printed upside down in order to get a different finish on the visible surface. I printed with matte PLA filament, which is probably best in terms of looks, but anything else probably works also. The plastic pieces may hold together even without any glue… depending somewhat on the filament and settings/calibrations of the printer. In any case; few drops of super glue probably won't hurt.

boardgameaccessories terraformingmars