KOTLC Song Family Crest Keepers of the Lost Cities

for Lost Cities (1999) Layer by Layer

ken830

Free

View on MakerWorld 36 67 Added Apr 6, 25 | Updated Sep 2, 26 Support ken830 by Liking and Boosting their model.

Plan Your Print

✓ Optional multicolor profile The designer also offers a multicolor way to print this (an MMU/AMS profile or per-color parts)

About 3 g of filament From the designer's print profile

Print Profile (2) 2 Color with AMS - 0.2mm nozzle, 0.1mm layer 40m 4 g PLA

2 Color with AMS - 0.2mm nozzle, 0.1mm layer

1 plate 40m 4 g PLA

P1S, X1E, X1 Carbon, X1, H2D, A1, P1P, A1 mini, H2D Pro, H2S, P2S, H2C, X2D, A2L

2-Color print (with AMS) • I've already separated the two parts and the AMS will handle the filament swap. • There is only a single filament swap operation, so it's not wasteful.

Plate Details (1)

0.2 mm nozzle, all plates

Plate 1

40m 4 g PLA · 1 g PLA · 3 g

PAUSE Color Change - 0.2mm nozzle, 0.1mm layer

1 plate 32m 3 g PLA

P1S, A1 mini, X1E, H2D, P1P, X1, X1 Carbon, A1, H2D Pro, H2S, P2S, H2C, X2D, A2L

A simple pause at layer • Start the print in your first color (black suggested) • There is a pause at the beginning of Layer 19 (1.90mm height). • Manually unload and load the new filament (silver suggested) • Resume printing starting at Layer 19 in the second color.

Plate Details (1)

0.2 mm nozzle, all plates

Plate 1

32m 3 g PLA · 3 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

NOTE: I wasn't sure if there is enough interest in KOTLC and the family crest pins, so I was hesitant to share this. If this model gets a lot of downloads and likes, it might be worth my time in creating some of the other family crests. Let me know which one(s) you'd like most.

For fans of the Keepers of the Lost Cities series by Shannon Messenger, here is a recreation of the Song Family Crest Pin. I tried to be as faithful to the official illustration by Laura Hollingsworth as possible:

You have two options to print this in multicolor. I have included profiles for each method:

A simple pause at layer
Start the print in your first color (black suggested)
There is a pause at the beginning of Layer 19 (1.90mm height).
Manually unload and load the new filament (silver suggested)
Resume printing starting at Layer 19 in the second color.
2-Color print (with AMS)
I've already separated the two parts and the AMS will handle the filament swap.
There is only a single filament swap operation, so it's not wasteful.

The model is sized for my daughter as part of her Halloween costume. If you resize it, please carefully re-check the layer at which you need to do the filament/color change.

NOTE: This model is intended to be printed with a 0.2mm nozzle at 0.10mm layer height . This is to properly capture the intricate details of the crest. If you want to print this with a 0.4mm nozzle, you may want to scale it larger or you may end up losing too much detail. YMMV.

You can use it as a pin by sticking a brooch pinback to the back of the model.

Optional: You can fill the center area with UV resin to give it a more finished look:

kotlc keepers of the lost cities song family song crest crest pins pin crest pin shannon messenger messenger