Mysterium Park - Organizer

for Mysterium Park (2020) Layer by Layer

Inserts Free

View on Cults3D 2 39 2,462 Added Nov 27, 20 | Updated Apr 17, 26 Support internet__king by Liking and Boosting their model.

Designer's Description

This organizer is designed to print with a .8 nozzle. .4 and .2 will work fine as well. The box is is snug and you want it that way as it used the box for outside walls. Make sure you have esteps and flow correct. Your printed walls should be 1.6mm thick.

This design was tested with Mayday, Sleeve Kings, and Board Game Sleeves. I recommend sleeve kings sleeves as they are thinner than Mayday premium and Board Game Sleeves and will make your card stacks shorter.

Watch the video real quick to see the tray in action before printing.

There are 2 designs included in this, one for large format printers and a split design for smaller format printers you will need to glue together. I've added an assembly video.

Organizer Video
https://youtu.be/9RKT-UHIYnw

Assembly Video
https://youtu.be/96s2eUDtPWM

For the 1-piece on a large format printer print
-Mysterium Park v6

For the 2-piece that requires gluing together print
-Mysterium Park Split-1
-Mysterium Park Split-2 (requires you turn on supports in the slicer)