Deep Madness Investigator Card Holder

A card holder and dashboard for the investigator cards and related tokens/equipment cards for the board game deep madness.Contains:Space for Investigator cardSpinner to keep track of healthSlot for drowning dialSlots for both sanity and madness tokensSpace on ledge for other tokensSlots for stands so it can be used flat, at 30 degrees or at 60 degreesFront panel can be printed in the 6 colours to match the coloured bases supplied with the game.BOM (per stand):1x 8mm M3 Screw1x M3 Brass knurled nut ( https://www.banggood.com/100pcs-M3x5x5mm-Metric-Threaded-Brass-Knurl-Round-Insert-Nuts-p-1050182.html?rmmds=myorder&cur_warehouse=CN )1x M3 WasherAssembly:Glue the front and middle parts together.Insert the knurled nut into the hole using a soldering iron.Affix the spinner using the M3 screw, suing the washer as a spacer. Don't over tighten, just enough to give a bit of resistance while spinning and to hold in place. A small amount of glue can be useful to keep the screw in place.Glue the rear part onto the assembly.CHANGE-LOG29/11/2018 - Updated the spinner to be more optimised for printing with a 0.4mm nozzle. New file uploaded. Ensure extrusion width for top layer is 0.4mm.18/02/2018 - Added a Mk2 variant to the spinner that utilises the dual colour, single nozzle technique Devan from Make Anything showed on his YouTube channel: https://www.youtube.com/watch?v=KV2AjyowXX4&t=1003sThis variant doesn't have a spacer on it so will require a washer or similar to be used as a spacer.17/11/2019 - Uploaded assembly instructions with images in pdf format. Uploaded amended front and middle panels that give more room for sleeved cards.