Log in to join the conversation.
Murmel Labyrinth Puzzle - The Challenge
Please support Allpa_112 by Liking/Boosting their Print on MakerWorld.
Can you solve all the challenges of the marble maze puzzle?
Place the 5 different puzzle pieces of the marble run in such a way that just the right number of the 10 balls end up in the respective box! The game requires a lot of puzzling, puzzles and logical thinking. Are you up to all the challenges (50 pieces included)?
Choose one of the 50 challenges and assemble the marble run so that after pulling the two sliders, the 10 balls find the right way into the boxes. The color of the numbers on the challenge card indicates which puzzle piece must be used on the starting field.
The track is optimized for the plastic balls with 14 mm from the Maker's Supply. But it works optionally with the 12 mm metal balls.
Printing notes:
• I recommend printing the pieces in my color specifications so that the challenges match the puzzle pieces.
• All components have a maximum size of 18x18cm and therefore also fit on the A1 Mini.
• Only the two base elements need some supports for printing
• I recommend gluing the basic elements together, but it also only works plugged in (if you want to store it smaller).
• The number of parts required is indicated in the file name and taken into account in the print profile. Don't print more puzzle pieces, or solving the challenge will be too easy!
• The two parts of the starting elements have a color change for the font
• The challenge cards have a color change for the font. Print all 10 cards in the 5 colors of the puzzle pieces
Translated from German - show original
Schaffst du es alle Herausforderungen des Murmel-Labyrinth-Puzzles zu lösen?
Setze die 5 verschiedenen Puzzle-Teile der Murmelbahn so ein, dass genau die richtige Anzahl der 10 Kugeln in der jeweiligen Box landen! Das Spiel erfordert viel knobeln, rätseln und logisches Denken. Bist du allen Herausforderungen gewachsen (50 Stück enthalten)?
Such dir eine der 50 Herausforderungen aus und baue die Kugelbahn entsprechend zusammen, dass nach dem Ziehen der beiden Schieber die 10 Kugeln den richtigen Weg in die Boxen finden. Dabei gibt die Farbe der Zahlen auf der Herausforderungs-Karte an, welches Puzzle-Teil auf dem Start-Feld verwendet werden muss.
Die Bahn ist optimiert für die Kunststoff-Kugeln mit 14 mm aus dem Maker's Supply. Es geht aber optional mit den 12 mm Metallkugeln.
Druckhinweise:
• Ich empfehle die Teile in meinen Farbvorgaben zu drucken, damit die Herausforderungen mit den Puzzle-Teilen übereinstimmen.
• Alle Bauteile haben ein maximales Maß von 18x18cm und passen somit auch auf den A1 Mini.
• Nur die beiden Basiselemente benötigen etwas Stützen für den Druck
• Ich empfehle die Grundelemente zusammen zu kleben, es funktioniert aber auch nur gesteckt (wenn man es kleiner verstauen möchte).
• Die Anzahl der benötigten Teile ist im Datei-Name mit angegeben und im Druckprofil berückstichtigt. Drucke nicht mehr Puzzle-Teile, sonst wird die Lösung der Herausforderung zu einfach!
• Die beiden Teile der Start-Elemente haben einen Farbwechsel für die Schrift
• Die Herausforderungs-Karten haben einen Farbwechsel für die Schrift. Drucke alle 10 Karten in den jeweiligen 5 Farben der Puzzle-Teile