Rajas of the Ganges Insert

This is my custom board game insert for the game Rajas of the Ganges, including both the Goodies 1 and Goodies 2 expansions. I'm always welcome to constructive criticism, or suggestions for improvement. Feel free to comment!

This insert has one larger piece, the Dice Tray, that is very tight on a 220x220 bed. I was able to get it to fit using a 2 line skirt, 1 mm from the print. The Goodies tray is also fairly infil heavy, as it is taking up a big chunk of real estate in the box, and it leaves space for me to adjust if/when there are new expansions

The design is meant to allow for verticle storage, and passes the shake test fairly well...I did have a couple of the yield tiles move around on a vigorous shake, but it wasn't enough for me to be worried about it during normal storage.

One new thing I'm starting to add to my designs is the box size that I have. Based on feedback on a couple of deigns, I'm realizing that not every box is the same size. So before you print, measure your box. My box measures 288m by 285mm by 70mm

For printing, print one of each STL, and 4 of the Player Boxes and Tile Trays. Each object is outlined in the Printing Costs image I've attached, along with approximate time and cost for each.

Thanks!