Dice Command 'Armoured Division' Tanks-Colorized

for Dice Command (2021)

B1g Dav3 + Follow

1 plate 13h 2m 0.4 mm 156 g PLA Free

View Print on MakerWorld

Please support B1g Dav3 by Liking/Boosting their Print on MakerWorld.

Before you print

✓ Needs about 156 g

Print profiles

0.12mm layer, 2 walls, 15% infill

1 plate 13h 2m 0.4 mm 156 g PLA

Box for Tanks - 0.2mm layer, 2 walls, 12% infill

3 plates 4h 2m 0.4 mm 151 g PLA

As sliced by the designer. Your printer, filament, and settings will change these numbers.

This is the freely available STL that came with the Kick-starter Edition (you obtain it and the license by signing up for the email list on their website: https://www.dicecommand.com/) of ‘Dice Command’ in which these hold the die for the ‘Armoured Divisions'. You will need a total of 8 (which are all on a single plate).

I modified the original in these ways:

• Colorized the print **NOTE: This is a 4 color print - Olive Drab Green, Gold/Yellow, Silver, & Black…adjust if/as needed

• added material at the bottom to avoid supports (although the print still needs a single support for the turret and possibly the back tracks)

• Added a hole in the middle to aid in easier getting the die out/in

Be careful removing supports….what I did was to clamp/pull-down in the middle to remove bottom part…then turret part could easily twist off in your finger pressure (see pictures)

UPDATE: 2025-08-26 - I've added a themed container/box sized properly to hold these extra Armoured Divisions for the game (based on the great work of @RDesigns - you'll need to view their print info for assembly instructions . It includes two different lids (one with a name & one without) - you'll only need to print one of them. Enjoy!

Boost Me Please consider Boost(ing) (its FREE and is really encouraging!). Thanks in advance :^D

kickstarter board game accessory colorized war game dice command

From BoardGameGeek

Here is a touched-up remix of the freely available Dice Tank STL & Holder!