Half nib tray for Agricola

This is a half of a nib tray from wtwerner's Agricola Storage Solution (http://www.thingiverse.com/thing:134407), for those of us with smaller print volumes.

You can print 2 of halfnib.stl and it will fit all the parts, but won't span the full gap in the frame from wtwerner's design. I chose this route to save plastic. It still works nicely, but you might want to put in a piece of dowel underneath it or something to help hold the tray up... If you go this route, you'll need about a 6"x6" print bed.

If you chose to print one of each part, you'll get wtwerner's full design, but it will use more filament and you'll need about a 6"x7" print bed at a minimum.