Aeon Trespass Odyssey - Labyrinth Tracker

My group likes to play with the primordial sheets upright, so we are unable to use the tracker on those sheets. We have drawn the tracker on another sheet of paper but find the the little token that is used to be tiresome - it is constantly getting knocked around. To fix this issue I have created this labyrinth tracker.

To complete this you will need to print the following:

1x Face Plate

1x Spring holder

4x spring

1 of each of the labyrinth tiles (you can use these or design your own!)

All can be printed with default settings with the exception being the spring holder. The little indicator tab needs to be supported (See image)- I went with a tree support. It was not perfect but a little bit of filling was able to allow the face plate to move smoothly underneath.

Once everything is printed it can be assembled by sliding the face plate on top of the spring holder (and beneath the indicator tab). Then insert a spring into each of the gaps. The pressure exerted by the springs should hold it all together. Now you should be able to spin the tracker and feel it snap into place on one of the 4 positions.

Finally you can glue in the labyrinth tiles. I painted mine with a bit of acrylic to make them look more like the game tiles.

Enjoy and let me know what you think!