Karak insert figures

for Karak (2017)

Inserts Free

View on Printables 3 31 308 Added Jun 29, 2025 Support Ctihy by Liking/Boosting their model.

Model Description

Insert for 14 pcs of 3D figures in the game (since the Darius figure is also on sale, a version for 15 figures is also available) - you can place figures with or without a colored ring. Space for storing a round curse coin on both sides (one paper original and the other metal from the Deluxe set for the game).

Be careful when inserting - the metal coin is slightly smaller than the paper one, so the hole on one side is a little smaller, so try it and don't force the paper one in there.

I printed on MK3S+, 0.20 Quality, 15% infill, PLA silver.

ATTENTION: Don't forget to force the supports on the locks on the railing and don't forget to print the railings.
____________________________________________________________________________________

Insert for 14 3D figures in the game (as the Darius figure is also on sale, there is also a version for 15 figures) - it is possible to place figures with or without a colored ring. Space to store round curse coins on both sides (one original paper and the other metal from the Deluxe game set).

Be careful when inserting - the metal coin is slightly smaller than the paper one, so the hole on one side is a little smaller, so try it and force the paper coin there.

I printed on MK3S+, 0.20 Quality, 15% fill, PLA silver.

ATTENTION: Don't forget to force the supports on the railing locks and don't forget to print the railing 2 times.
____________________________________________________________________________________

The last photo shows the insert set I chose for the game Karak, which will hold the complete released expansions, including the promo character Darius, all 3D figures, the Deluxe set, and 16 tiles grids.

The last photo shows my chosen set of the Karak insert, which will hold the complete released expansions, including the promo character Darius, all 3D figures, the Deluxe set and 16 pcs of tile grids.

3D figurine holder with two holes for paper and a metal (Deluxe) curse token
3D figure holder with two holes for paper and metal (Deluxe) curse tokens
https://www.printables.com/model/1155195-karak-insert-figures

Holder for 15 paper figures
https://www.printables.com/model/1158346-karak-insert-na-15-postavicek-podstavec-18-i-20-mm

4x Tile holder / 4x Tile holder
https://www.printables.com/model/1158440-karak-carcassonne-drzak-dlazdic

Box for original dice and life
https://www.printables.com/model/1158514-karak-krabicka-na-kostky-a-zivoty

Holder for chips and Deluxe dice
https://www.printables.com/model/1158532-karak-drzak-zetonu-a-deluxe-kostek

Tile grids
https://www.printables.com/model/1150222-karak-carcassonne-4x4-tiles-grid-mrizka

Holder for tile grids
https://www.printables.com/model/1158507-drzak-mrizek-karak-carcassonne

Translated from Czech - show original

Be careful when inserting - the metal coin is slightly smaller than the paper one, so the hole on one side is a little smaller, so try it and don't force the paper one in there.

I printed on MK3S+, 0.20 Quality, 15% infill, PLA silver.

ATTENTION: Don't forget to force the supports on the locks on the railing and don't forget to print the railings.
____________________________________________________________________________________

Insert pro 14 ks 3D figurek do hry (jelikož je dodatečně v prodeji i figurka Dariuse, je k dispozici i verze pro 15 figurek) - lze umístit figurky s barevným kroužkem i bez. Prostor pro uložení kulaté mince prokletí na obou stranách (jedna papírová původní a druhá kovová z Deluxe setu ke hře).

Pozor při vkládání - kovová mince je oproti papírové nepatrně menší, takže na jedné straně je otvor o něco menší, tak vyzkoušejte a tu papírovou tam nervěte násilím.

Tisknul jsem na MK3S+, 0.20 Quality, výplň 15%, PLA silver.

POZOR: Nezapomeňte si vynutit podpěry u těch zámků na zábradlíčka a nezapomeňte si vytisknout 2x to zábradlí.
____________________________________________________________________________________

Na poslední fotce je mnou zvolená sestava insertu do hry Karak, která pojme kompletní vydaná rozšíření, včetně promo postavy Dariuse, všech 3D figurek, Deluxe setu a 16 ks mřížek na dlaždice.

3D figurine holder with two holes for paper and a metal (Deluxe) curse token
Držák 3D figurek s dvěma otvory pro papírový i kovový (Deluxe) žeton prokletí
https://www.printables.com/model/1155195-karak-insert-figures

Holder for 15 paper figures / držák na 15 papítových figurek
https://www.printables.com/model/1158346-karak-insert-na-15-postavicek-podstavec-18-i-20-mm

4x tile holder / 4x držák na dlaždice
https://www.printables.com/model/1158440-karak-carcassonne-drzak-dlazdic

Box for original dice and life / Krabička na původní kostky a životy
https://www.printables.com/model/1158514-karak-krabicka-na-kostky-a-zivoty

Holder for chips and Deluxe dice / Držák na žetony a Deluxe kostky
https://www.printables.com/model/1158532-karak-drzak-zetonu-a-deluxe-kostek

Tile grids / Mřížky na dlaždice
https://www.printables.com/model/1150222-karak-carcassonne-4x4-tiles-grid-mrizka

Holder for tile grids / Držák mřížek
https://www.printables.com/model/1158507-drzak-mrizek-karak-carcassonne

holder boardgame insert drzak figurky karak