← Steam ← Danthemann

MakerWorld · added Dec 31, 2024 · updated Jul 22, 2026

658 downloads · 349 likes · 72 comments

LayerUp history

Added to LayerUp Jul 11, 2026

added by Scout

listing refreshed Jul 22, 2026

Table Talk

Nothing here yet. Love this design? Say so - the designer might see it.

portable monitor steam deck stand

for Steam (2009)

Danthemann + Follow

Card & Deck Holders

2 plates 2h 29m 0.4 mm 78 g PETG Free

View Print on MakerWorld

Please support Danthemann by Liking/Boosting their Print on MakerWorld.

Before you print

✓ Needs about 78 g

Print profiles

-STABLE VERSION- (Longer Base/more stable)

2 plates 2h 31m 0.4 mm 78 g PETG

0.24mm layer, 2 walls, 15% infill

2 plates 2h 29m 0.4 mm 78 g PETG

16mm thick monitor stand

3 plates 2h 47m 0.4 mm 83 g PLA

Deck Stand Stable No Clips

1 plate 2h 14m 0.4 mm 75 g PLA

As sliced by the designer. Your printer, filament, and settings will change these numbers.

I found this on printables by anthonysavatar, but It didn't fit my monitor that I got from amazon, the monitor is a 15.9" screen, 14mm thick at the base. I modified the model to fit and also added an extra spot in front to hold the screen in case I didn't want two screens. I also recommend the 180 adaptors. If you want to use just one cable from the steam deck to screen and one cable to charge I found this hub on amazon. The hub has a type c video port, I had to search for a while for something that actually works.

-STABLE VERSION- Due to some comments, I modified the original to be longer in the back and the upper display was moved forward so that it would not tip if the deck is removed.