Dice Throne Kallax Storage Tower

This is a Kallax compatible remix of the storage system for Dice Throne designed by Frosty. All drawers include space for the miniatures to fit (except Treant) as well for easy grab and go when playing DTA or Missions. These drawers have a push press system in the back from cabinet hardware embedded just below the health and CP dials to make it easy to get to when set on the shelves and uses the metal plate included with the magnet in the pin to hold them in place. These are the push latches that I used, but any 2.87in push cabinet hardware should work.

Included in the models are the drawer that is used for the majority of heroes, a special drawer for Thor and Iceman (because their miniatures don't quite fit with the normal set up). The Dice Throne Outcast minis have larger bases and will not slide into the mini base notch. However, they will lie in the mini space just fine. I used the Iceman drawer for the Headless Horseman. My drawers include a 1mm rounded bevel along the long edges of the drawer to help with tolerance and sliding in and out. The drawer height was also reduced to allow 8 drawers to fit within a Kallax cube vertically. All contents will still fit though.

There are 3 tower shelves in this file. There is one base, a middle expansion slot, and a topper. For each tower you need 1 base, 1 topper, and 6 expansion slots. These shelves should slide into each other but will need to be super glued together. I did not use a dovetail connection like the previous version to avoid tolerance issues. I designed these to be printed one drawer at a time and glued together to avoid filament waste when things go wrong with your print and to help with smaller printers. That said, you should not need to sand or trim any edges when printed. Drawers should slide in freely and the tower pieces should connect together with minimal effort and some Super Glue.

I also added a zip file with revised labels for all the drawers, including Outcasts and Alchemist. Additionally, there is art for the Tower skins.

UPDATE 7/21/2026:

• New drawer STL files added for Forgemaster (fits all armor including the metal ones), and Druid (fits mini base)

• Drawer labels added for all Dice Throne Vanguard characters and Mystic Brawler.