← Dominion ← EvaDesign

MakerWorld · added Dec 11, 2025 · updated Jul 22, 2026

77 downloads · 35 likes · 16 comments

LayerUp history

Added to LayerUp Jul 11, 2026

added by Scout

listing refreshed Jul 22, 2026

Table Talk

Nothing here yet. Love this design? Say so - the designer might see it.

Dominion Base Set (Travel) Box (Second Edition)

for Dominion (2008)

EvaDesign + Follow

Card & Deck Holders

6 plates 18h 1m 0.4 mm 689 g PLA Free

View Print on MakerWorld

Please support EvaDesign by Liking/Boosting their Print on MakerWorld.

Before you print

✓ Needs about 689 g

Print profiles

Full 4 color Print 0.2mm layer, 2 walls, 10% infill

6 plates 18h 1m 0.4 mm 689 g PLA

0.2mm layer, 2 walls, 15% infill

1 plate 1h 50m 0.4 mm 62 g PLA

https://www.paypal.com/paypalme/Rik2408

1 plate 4h 36m 0.4 mm 149 g PLA

As sliced by the designer. Your printer, filament, and settings will change these numbers.

The Dominion Box

I have designed a multipurpose box to fit the base set of Dominion
Fold the handle down to make the box level and use the lid as the trash pile!

Functional Trash pile

Handle to make the box flush

This is fo the second version of the base set of dominion will fit inside the box

🚀 What can fit inside the box

• All Cards

• The Manual

• The Trash Pile Card

✅ 2 versions included for the Magnetic lids AND the Lid itself

Box Lid:

• 4 color design for normal AMS

• 8 color design where you have to manually change the filament during print for the best design (or use 2 AMS systems)

Magnetic Lid:

• 4 color design for normal AMS

• 7 color design where you have to manually change the filament during print for the best design (or use 2 AMS systems)

🛠 Hardware you need

• 4x 30mm M3 Bolts

• 2x 35mm M3 Bolts (for the handle)

• 8mm x 2mm magnets (8x) (they have to be strong (Metric measures)

The inner component need to be glued to the box so they don't fall out furing travel/opening

💡 No Worries!
Because there are so many expansions it is impossible to make a design to fit everyone’s needs.
BUT i am willing to make variations of this design if enough people want it.
Comment your combination/expansion in the comment section and if it gets a couple of likes i will see what i can do!