Conan (monolith) board game organizer - king/stretch/3BigE/Conqueror/Versus/Frazetta/Worms/RedNails/KushiteWHunters/Yogah - sleeved cards

Board game organizer for Conan (monolith) and the following sets and expansions. Also supports sleeved cards, I use mayday premiums (thicker ones).

Kings Pledge
Stretch goals/ Collectors Box
Stygia
Nordheim
Khitai
Conqueror & Tome of Skelos
Versus
Frazetta Guest box
Worms of the Earth
Red Nails
Kushite Witch Hunters
Yogah of Yag

This will shrink all the above down into 4 boxes.

Box 2 must be the red nails box as that is slightly taller. All the other boxes must be the core sized boxes.

The name of the stl will tell you how many you need to print and which box it is for.

Example: conan-b2-main-figures x 14.stl

That means you need 14 of those and it will be for box 2.

Names like conan-b3-50-55-60mm-figures.stl mean that the model will be used for figures with the bases that have the diameters of that size, in this example, the stl will hold stuff that is 50mm, 55mm, and 60mm in diameter.

###########################################

The pictures are in order and show what goes where.

###########################################

For box 4, there are many weird sized minis as well as minis that don't have bases. I carved up the plastic mold to put into the STLs to protect them from jostling around.

This was printed with bambu studio defaults except 5% infill and 3 walls. Print the spacers however you want, i put zero top and bottom layer with rectilinear infill.

• .2mm layer height

• .4mm nozzle

If you have found this model helpful or fun, please "like" the model as it helps towards getting additional filament for printing. Also, if you enjoyed this model and want to see more, please consider buying me a coffee.

https://www.buymeacoffee.com/gameyspirits