Lost Ruins of Arnak box insert/organizer with expansion (sleeved cards) - REMIX

This is a remix of @Fabmaszter great box insert. Only the files that I changed are here, the rest are at the post made by @Fabmaszter which is linked directly below.

https://www.printables.com/model/105698-lost-ruins-of-arnak-incl-expansion-organizer

The photos show layer by layer how to put it together in the box starting from the bottom layer.

Changes I did:

• Taller item card box, the OG one was not tall enough for me

• Shortened spacer1 to accommodate taller item box and to fit ½ of 1 player/expedition-er tray

• Shortened spacer2 to accommodate the other ½ of the tray and 1 additional player/expedition-er tray

• Created a corner spacer to replace the scorepad section/spacer

• Added a hole in the player/expedition-er trays for easier removal of cards and deepened the trays

• Deepened the single resource tray

• Redid the setup tray to organize the scoring tiles, this is for quicker setup of the scoring tiles, also I had no idea what all the slots were for in the original model
• Slot for 4 x 2pt temple tiles

• Slot for 4 x 2pt temple tiles

• Slot for 4 x 2pt temple tiles

• Slot for 4 x 6pt temple tiles

• Slot for 4 x 6pt temple tiles

• Slot for 4 x 11pt temple tiles

• Slot for Fear tiles

Modifications were made using tinkercad.

Print the following from me:

• 1 x lroa-cards-artifacts.stl

• 1 x lroa-cards-fear.stl

• 1 x lroa-cards-items-v2.stl

• 1 x lroa-cornerspacer.stl

• 10 x lroa-playerexpeditionerstrays-v2.stl

• 2 x lroa-resourcetray-single-v2.stl (1 is empty and just used as a spacer)

• 1 x lroa-setuptiles-v2.stl

• 1 x lroa-spacer1-v2.stl

• 1 x lroa-spacer2-v2.stl

Print from @Fabmaszter:

• 1 x LRoA_Assistants_exp_105698.stl

• 2 x LRoA_Res_double_105698.stl

• 1 x LRoA_Solo_105698.stl

• 1 x LRoA_Tiles_exp_split1.stl

• 1 x LRoA_Tiles_exp_split2.stl

@fuchsr made the models for the moonstaff and first player token which I highly recommend

https://www.printables.com/model/374337-moon-staff-for-lost-ruins-of-arnak

https://www.printables.com/model/374320-old-fashioned-alarm-clock-prop-for-lost-ruins-of-a

@Virral_261949 made the model for the compass and coins which are a must

https://www.printables.com/model/187812-lost-ruins-of-arnak-coin-and-compass-models

Printed at .6 layer height with a .8 nozzle. Initial layer was .32 and subsequent layers were .6.

Printer brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

No

Resolution:

.6

Infill:

5%

Filament brand:

GST3D

Filament color:

Blue

Filament material:

PLA+

Notes:

Print thin walls: checked
Top layer: 2
Bottom layer: 2
Skin overlap: 25%
Build plate adhesion type: brim