Lost Ruins of Arnak board game box insert /organizer with expansion (sleeved cards) REMIX

This is a remix of @Fabmaszter great box insert. For the all the STLs and upgrades, please go to here.

https://www.printables.com/model/468172


The photos show layer by layer how to put it together in the box starting from the bottom layer.

Changes I did:

Taller item card box, the OG one was not tall enough for me
Shortened spacer1 to accommodate taller item box and to fit ½ of 1 player/expedition-er tray
Shortened spacer2 to accommodate the other ½ of the tray and 1 additional player/expedition-er tray
Created a corner spacer to replace the scorepad section/spacer
Added a hole in the player/expedition-er trays for easier removal of cards and deepened the trays
Deepened the single resource tray
Redid the setup tray to organize the scoring tiles, this is for quicker setup of the scoring tiles, also I had no idea what all the slots were for in the original model
Slot for 4 x 2pt temple tiles
Slot for 4 x 2pt temple tiles
Slot for 4 x 2pt temple tiles
Slot for 4 x 6pt temple tiles
Slot for 4 x 6pt temple tiles
Slot for 4 x 11pt temple tiles
Slot for Fear tiles

Modifications were made using tinkercad.

Print the following from me:

1 x lroa-cards-artifacts.stl
1 x lroa-cards-fear.stl
1 x lroa-cards-items-v2.stl
1 x lroa-cornerspacer.stl
10 x lroa-playerexpeditionerstrays-v2.stl
2 x lroa-resourcetray-single-v2.stl (1 is empty and just used as a spacer)
1 x lroa-setuptiles-v2.stl
1 x lroa-spacer1-v2.stl
1 x lroa-spacer2-v2.stl

Print from @Fabmaszter:

1 x LRoA_Assistants_exp_105698.stl
2 x LRoA_Res_double_105698.stl
1 x LRoA_Solo_105698.stl
1 x LRoA_Tiles_exp_split1.stl
1 x LRoA_Tiles_exp_split2.stl



@fuchsr made the models for the moonstaff and first player token which I highly recommend

https://www.printables.com/model/374337-moon-staff-for-lost-ruins-of-arnak

https://www.printables.com/model/374320-old-fashioned-alarm-clock-prop-for-lost-ruins-of-a

@Virral_261949 made the model for the compass and coins which are a must

https://www.printables.com/model/187812-lost-ruins-of-arnak-coin-and-compass-models

Printed at .6 layer height with a .8 nozzle. Initial layer was .32 and subsequent layers were .6.