Log in to join the conversation.
Catan Card Tray
Please support Geekware by Liking/Boosting their Print on Printables.
Inspired by Kyle's card tray, I created my version with some similarities while keeping it simple. Designed to use a minimal amount of material, keep the cards organized, and draw quick and easy, especially during these dry winter months.
Printed with PLA, 0.4mm nozzle, 0.2mm layer height, 3 perimeters, 15% Grid infill, and no supports in the orientation shown, as long as your printer is capable of 12mm bridges. I offer the three (3) card tray or single tray depending on your needs.
Update Dec. 26, 2022: beta tested version 1 over the holidays with some mad Catan playing. The testers thought the card slot could be a little wider and a little deeper as the cards started to overflow the sides. The updated version is 2mm wider and slightly deeper with tapered sides. I also added provision on the base to accommodate 10mm diameter adhesive feet to keep the holder from sliding on smooth surfaces.
