Cribbage Board

Fully 3D printable cribbage board. Includes hole with screw-on cover for peg storage (fits six pegs). See below for specific printing instructions...

Printer Brand:

Prusa

Printer:

i3 MK3

Rafts:

Yes

Supports:

No

Infill:

varies

Filament: PLA

Notes:

Board can be printed flat side (base) down with no supports and no raft/brim - to minimize use of filament, 10 to 15% infill is suitable. Layers of .2 to .28 mm should work, larger and you may risk the peg hole threads not printing properly. To avoid a disfigured print, pegs are best printed two or three at a time so that the filament has time to harden slightly before the next layer is printed. They should be printed with a raft or brim, tapered end down. About 0.15 mm layers result in the nicest looking pegs. Finally, the screw should be printed vertically, with the sphere at the top, with a raft or brim and also with about 0.15 mm layers.

Category: Games