The White Castle Boardgame Bridge

<b>EDIT: added a more robust version, files prefixed with V2. Changes the snap fit prong connectors to a plug fit. Supports are easier to remove. I also noticed that depending on the make of filament, the tolerances on the connector may be a little tight. Therefore, I added a cut version version with more tolerance; V2 white castle bridge More Tolerance.stl</b>

Bridge model for the game White Castle. I have provided the model as a one piece and pre-cut as stl files. Plus a 3MF.

The Japanese bridge was remixed from https://www.thingiverse.com/thing:4678369 by user https://www.thingiverse.com/marv28297 and was modified to scale and dice platforms were added.

For the cleanest print, I cut in half down the center of the long-dimension of the bridge and printed with the handrails plate-down. Used the prong connectors and a wee bit of glue. Support is used for the dice platforms, came away very cleanly using Support PLA. I tried printing as a whole but couldn't get it supported clean enough to my satisfaction but give it a try. Without supports ,the handrails weren't clean enough although settings tweaks for overhangs may work.