BardSongs DM Screen Insert Cover

A cover for BardSongs DM Screen , designed for D&D and CoC inserts.

It needs 4x ø6x3mm magnets which is glued into the holes. Polarity matters.

The curtain module protective cover of Bard's Song is used to store and protect two modules (D&D and CoC), and can be tucked into the storage pouch together with the bidirectional dice tower.

You need 4 small magnets measuring ø6x3mm, which can be glued with super glue, paying attention to polarity.

Based on the magnetic poles of the three modules here, I use magnets glued to the protective cover with the S pole facing outward (the visible side), for reference only.

• Infill & Layer Height: Infill rate and the pattern plays an important role for the strength of this protective cover. I went for 20% Grid + 0.20 mm layer height. Feel free to set it yourself to meet your needs.

• Support: No

• Fill & Layer Height: Plays a key role in protecting the strength of the cover. I printed 20% mesh fill + 0.20 mm layer height. You can configure it according to your needs.

• Support: Not required

Note that this model file is open source under the CC BY-NC-SA 4.0 license. References must be credited, commercial use is prohibited, and modifications before distribution must use the same license.