Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Hanger clip for empty boardgame boxes
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
✓Needs about 76 g
From the designer's print profile
What it takes
4 plates
3h 7m
76 g PLA
P1S, H2D, X1, X1 Carbon, P2S, H2S, P1P, H2C, X2D, A1, A2L, X1E, H2D Pro, A1 mini
Plate Details (4)
0.4 mm nozzle, all plates
Plate 1 · 40mm for deeper boxes
28m
7 g
PLA · 7 g
Plate 2 · For ONLY box lid - no container part
36m
13 g
PLA · 13 g
Plate 3 · 36mm for short boxes
35m
7 g
PLA · 7 g
Plate 4 · A dozen short ones for Command Strips
1h 29m
49 g
PLA · 49 g
Model Description
Empty boardgame boxes are often covered with great art that just feels wrong to throw away. These handy clips can grip the top of an empty lid, or, slide between the lid and the box on the back side, then mounted on your walls. In 2 sizes, the shorter is great for smaller empty expansion boxes. Also, in 2 mounting formats, screw mounted into the wall, or with Command strips/4lbs/small. There's also a 3rd style for when you're mounting JUST an empty lid - it has more support at the corner of the bracket.
You can use 2 clips at the top of the box, or add a 3rd/4th at the bottom to avoid the tiny bit of tilt that's holding it away from the wall at the top.
